Diodes, All Products
1N4148 1W Zener Diode
Availability:
270 in stock
QUICK OVERVIEW
- Maximum Repetitive Peak Reverse Voltage (VRRM): 100V.
- Maximum RMS voltage (VRMS): 75V.
- Maximum Average Forward Rectified Current(IF(AV)): 0.15A.
2.00 SAR
If ordered today we estimate delivery by 03, December 2023 inside KSA , direct branch pick up available in Al Ahsa
270 in stock
1N4148 1W Zener Diode is a general-purpose silicon diode. For the protection of various devices, regulating current flow, etc this diode is useful.
Package Includes:
1 x 1N4148 1W Zener Diode.
| Maximum Repetitive Peak Reverse Voltage (V) | 100 |
| Maximum RMS Voltage (V) | 75 |
| Maximum Average Forward Rectified Current (A) | 0.15 |
| Operating Junction Temperature (°C) | 175 |
| Storage condition | -65°C to +150°C |
| Length (mm) | 4.3 |
| Width (mm) | 2.4 (Body Diameter) |
| Weight (gm) | 1 (approx) (each) |
| Shipment Weight | 0.010 kg |
| Shipment Dimensions | 5 × 8 × 1 cm |
Based on 2 reviews
Show only reviews in English (0)
Add a review
Related products
-
Motors & Drivers, All Products
L298N 2A Based Motor Driver Module
QUICK OVERVIEW
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: AA034 -
Motors & Drivers, All Products
L293D Motor Driver/Servo Shield for Arduino
QUICK OVERVIEW
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AA031 -
Arduino, Motors & Drivers, All Products
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino, Motors & Drivers, All ProductsCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: AA153
محمد عبد الله الحويطي (verified owner) –
محمد عبد الله الحويطي –
مؤيد ناجي (verified owner) –
مؤيد ناجي –