Motors & Drivers
Showing 1–20 of 120 resultsSorted by popularity
-
-
All Products, Motors & Drivers
Gear motor for Robot Smart Car DC DIY 3- 6V Grade A
Quick Overview:
- Robot Smart Car DC motor DIY 3-6V Grade A
- Reduction Ratio 1:48
- Rotate Speed 125rpm/min
- Voltage: 3-6VDC
- Current: 80-150mA
- No Load Speed: 3V-125 rev/min5V-200 rev/min6V-230 rev/min
- Load Speed: 3V-95 rev/min5V-160 rev/min6V-175 rev/min
- Output Torque: 3V-0.8kg.cm5V-1.0kg.cm6V-1.1kg.cm
SKU: AD014 -
Motors & Drivers, All Products
3V-6V High Quality Toy DC Motor
QUICK OVERVIEW
- Motor type: DC Toy Motor
- Terminal: 2
- Direction of working: Both clock and anticlockwise
- Voltage supply range:3V to 6V
- Typical operating voltage:5V
- No load current:25 mA
- No load speed:up to 14000 @6V
- Maximum Loaded current:250mA
- Maximum stall current:500mA
- Loaded speed:5000 rpm
- Rated load:10g-cm
- Starting torque:20g-cm
- Material: metal
SKU: AD016 -
Motors & Drivers, All Products
L298N 2A Based Motor Driver Module
QUICK OVERVIEW
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: AA034 -
-
All Products, Motors & Drivers
DC6-12V MINI Aquarium water Pump R385
QUICK OVERVIEW:
- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A
- Recommended voltage ratings are 9v 1A or 12v 1A.
- Maximum suck range of 2m.
- The maximum head range of 3m.
- Works with liquids of up to 80°C.
- The maximum flow rate of up to 1 – 3L/min.
SKU: AC152 -
All Products, Motors & Drivers
3-6V DC Motor
QUICK OVERVIEW
- Motor type: DC Motor
- Terminal: 2
- Direction of working: Both clock and anticlockwise
- Voltage supply range:3V to 6V
- Typical operating voltage:5V
- No load current:25 mA
- No load speed:up to 14000 @6V
- Maximum Loaded current:250mA
- Maximum stall current:500mA
- Loaded speed:5000 rpm
- Rated load:10g-cm
- Starting torque:20g-cm
- Material: metal
SKU: ND020 -
Motors & Drivers, All Products
L293D Motor Driver/Servo Shield for Arduino
QUICK OVERVIEW
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AA031 -
Motors & Drivers, All Products
Servo MG996 13KG 180 degree
QUICK OVERVIEW
- Weight: 55g
- Dimension: 40.7×19.7×42.9mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
SKU: AA023 -
-
All Products, Arduino, Motors & Drivers
Solenoid Electric Door Lock 12 V
- Holding force: 0.25kg
- Energized forms: intermittent
- Unlocking time: 1S
- Dimensions: 54 x 42 x 28 mm (LxWxH)
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: AB102
