Micro Controller
Showing all 15 resultsSorted by popularity
-
Integrated Circuits, Micro Controller, All Products
L293D PowerDIP-16 Stepper Motor Controller/ Driver
Integrated Circuits, Micro Controller, All ProductsL293D PowerDIP-16 Stepper Motor Controller/ Driver
QUICK OVERVIEW
- Overtemperature Protection
- Logical “0” Input Voltage Up To 1.5 V (High Noise Immunity)
- Internal Clamp Diodes.
- Featuring Unit rode L293 and L293D
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
SKU: AC056 -
-
All Products, Micro Controller
ATmega328P-U PDIP-28 Microcontroller
QUICK OVERVIEW
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
SKU: AC053 -
-
Micro Controller, All Products
ATmega8A-PU DIP-28 Microcontroller
QUICK OVERVIEW
- Advanced RISC Architecture.
- Up to 16 MIPS Throughput at 16 MHz.
- On-chip 2-cycle Multiplier.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Programming Lock for Software Security.
- Programmable Serial USART.
- Applications of ATmega8 Microcontroller:
- Useful for Multiple DIY projects.
SKU: AC079 -
-
Micro Controller, All Products
PIC K150 USB Automatic Develop Microcontroller Programmer
QUICK OVERVIEW
- Support the most popular programming PIC chips, read, encryption and other features!
- No external power supply, communication, and power is only a USB cable to print complete, without any cable.
- PICSTARTPLUS much faster rate than programming.
- Can easily read the contents of the chip program area.
- Automatic programming verification.
- Comprehensive information prompts, allowing users to understand the working state.
SKU: NA095 -
Micro Controller, All Products
ATmega88PA-AU TQFP-32 Microcontroller
QUICK OVERVIEW
- Advanced RISC architecture – On-chip 2-cycle multiplier
- High endurance, non-volatile memory segments
- QTouch® library support – Capacitive touch buttons, sliders and wheels
- Peripheral features – Byte-oriented Two-Wire serial interface
- Power-on reset (POR) and programmable brown-out detection
- Internal Calibrated RC oscillator
- External and internal interrupt sources
- Five sleep modes – Idle, ADC noise reduction, power-save, power-down and standby
SKU: AC221 -
Micro Controller, All Products
ATmega32A AU TQFP-32 Microcontroller
QUICK OVERVIEW
- Advanced RISC architecture – On-chip 2-cycle multiplier
- High endurance, non-volatile memory segments
- QTouch® library support – Capacitive touch buttons, sliders and wheels
- Peripheral features – Byte-oriented Two-Wire serial interface
- Power-on reset (POR) and programmable brown-out detection
- Internal Calibrated RC oscillator
- External and internal interrupt sources
- Five sleep modes – Idle, ADC noise reduction, power-save, power-down and standby
SKU: AC222
