- CPU: 240 MHz
- SoC: Wi-Fi and Bluetooth module
- Wi-Fi: 802.11 b/g/n (up to 150 Mbps) @2.4 GHz
- Bluetooth: v4.2 BR/EDR and BLE
- Dimensions: 39 × 31 mm
- Power Supply: 3 – 5V
- Operating Voltage: 3.3V I/O pins
- Power Consumption: 100 – 240 mA
- I/O Ports: 40
- Interfaces: DAC x2, ADC x18, I2C, SPI, I2S, GPIO, Touch, UART, External Flash (up to 16 MB), SD support
- Micro-USB Port: Integrated
- Antenna: PCB-mounted
- PWM: Up to 16 channels
- Package Includes: ESP32-WROOM-32 D1 Mini
IOT
Showing 1–20 of 57 resultsSorted by popularity
-
-
IOT, Wireless devices, All Products
ESP8266 NodeMCU lua wifi internet
QUICK OVERVIEW
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: NA225 -
IOT, Wireless devices, All Products
HC-05 4pin Bluetooth Module(Master/Slave) with Button
QUICK OVERVIEW
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
SKU: AA127 -
IOT, Wireless devices, All Products
NEO-6M GPS Module
QUICK OVERVIEW:
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
This Item is not Applied to Return and Exchange Policy, Please Read the description
SKU: NA058 -
IOT, Wireless devices, All Products
Esp32-cam ov2640 camera CH340
Quick Overview:
ESP32-CAM Development Board Test Board WiFi+ Bluetooth Module ESP32 Serial Port with OV2640 Camera CH340
Note: This product supports libraries version 2.0.1 or less on Arduino IDE. you can get library approved by ielectrony team from this link
SKU: NA571 -
All Products, IOT, Projects Products
IOT Learning Kit 1 by ielectrony Version 2024
A Kit intended for the course of computer science and engineering at the secondary school in Saudi Arabia
This Kit contain components for the following Projects
- Smart Home System
- Plant watering System
- Smoke detection System
Note: You will receive the Arduino Programming Codes once you place the order
SKU: IOT001 -
All Products, IOT, Wireless devices
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
All Products, IOT, Wireless devicesSIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
QUICK OVERVIEW
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
This Item is not Applied to Return and Exchange Policy, Please Read the description
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: NA243 -
IOT, Wireless devices, All Products
HC-06 6Pin Bluetooth Module Without Button
QUICK OVERVIEW
- Used for a GPS navigation system, water, and electricity gas meter reading system.
- With the computer and Bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module.
- Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
- Potter default rate of 9600, the user can be set up.
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
SKU: AA096 -
IOT, Wireless devices, All Products
3.3V VCC Adapter Board for NRF24L01
Quick Overview:
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator:
- Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
SKU: AA265 -
All Products, IOT, Projects Products
IOT Learning Kit 2-1 for Secondary School in Saudi Arabia by ielectrony
All Products, IOT, Projects ProductsIOT Learning Kit 2-1 for Secondary School in Saudi Arabia by ielectrony
A Kit intended for the course of computer science and engineering at the secondary school in Saudi Arabia
This Kit contain components for the following Projects
- LED blinking
- Passive Infrared Sensors (PIR) Alarm
- DC motor On/Off based on temperature status
- Smart Lock with your own passcode
- Smart waste management
SKU: IOT002 -
All Products, IOT, Wireless devices
Sim808 module, Gsm GPRS GPS IPX Development Board HIGH SCHOOL with the GPS antenna
All Products, IOT, Wireless devicesSim808 module, Gsm GPRS GPS IPX Development Board HIGH SCHOOL with the GPS antenna
This Item is not Applied to Return and Exchange Policy, Please Read the description
Quick Overview:
- 22 tracking/66 acquisition channel
- GPS L1 C/A code
- Precision: Tracking: -165dBm,
- Cold start: -148dBm
SKU: NA246 -
All Products, IOT, Wireless devices
SIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board Antenna
All Products, IOT, Wireless devicesSIM900A V4.0 Kit Wireless Extension Module GSM GPRS Board Antenna
This Item is not Applied to Return and Exchange Policy, Please Read the description
Quick Overview
- A TTL level, compatible with 3.3V and 5V.
- The two antenna interface, the default SMA straight head, connector for IPXmini antenna.
- One way of speech interface, the way Mike interface.
SKU: NA251 -
All Products, Arduino, IOT, Wireless devices
Arduino UNO R4 WiFi
Quick Overview
- Arduino UNO R4 WiFi [ABX00087] – Renesas RA4M1 / ESP32-S3 – Wi-Fi, Bluetooth, USB-C, CAN, DAC, OP AMP, Qwiic Connector, 12×8 LED Matrix
- Merges Renesas RA4M1 and ESP32-S3 for power and connectivity.
- 12×8 LED matrix, Qwiic connector, HID support, VRTC, and OFF pin.
- Enhanced memory and faster clock speed.
- Wide input voltage range (5V to 24V).
- Wi-Fi/Bluetooth with Arduino Cloud compatibility.
- LED matrix for creative projects.
- Ideal for IoT projects and complex designs.
SKU: AA746 -
All Products, IOT, Learning Kits & Robotics STEM, Projects Products
ESP32 IOT Basic Starter Kit
Quick Overview
- Easy-to-use ESP32 Development Board.
- Inclusion of diverse modules such as LED, DHT11, OLED, and more.
- Compatibility with Arduino IDE for seamless programming experience.
Note: You will get Tutorial e-book after Purchasing
SKU: AE312 -
All Products, IOT, Wireless devices
ESP32-CAM-MB Micro USB Download Module for ESP32 CAM Development Board
All Products, IOT, Wireless devicesESP32-CAM-MB Micro USB Download Module for ESP32 CAM Development Board
Quick Overview
- This module is a programmer shield for the ESP32-CAM board, with GPIO connections.
- It uses the CH340G USB to serial chip for programming via the USB port on the shield.
- Suitable for IoT applications, home automation, wireless control, monitoring, and more.
- Supports WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards.
- Has 9 GPIO ports and 520KB SRAM plus 4MB PSRAM.
- Supports UART, SPI, I2C, PWM, and other interfaces.
- Comes with onboard PCB antenna and supports TF cards up to 4GB.
- Ch340 IC Driver: CH34x_Install_Windows_v3_4
- Dimensions: 40mm x 25mm x 10mm
- Weight: 6g
SKU: AH013 -
All Products, IOT, Wireless devices
ESP32-WROOM-32 D1 Mini
Quick Overview
SKU: YF334
