-
Sensors, All Products
Unsoldered GY-906 MLX90614 BAA Non-touch Infrared Temperature Sensor Module
QUICK OVERVIEW
- Small size, low cost
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder
jumpers - Easy to integrate
- Factory calibrated in wide temperature range:(-40 … + 125 ° C for sensor temperatur and -70 … + 380 ° C for object temperature).
SKU: NB119 -
All Products
Soldering Service 1
By purchasing this service, you will receive a soldering service for 1 electronic board. You can increase the quantity to increase the required boards in order to match the amount of boards you want to solder.
This service is suitable for soldering between 1 and 10 points (pins or wires) for each electronic board.
SKU: SLDR01
Unsoldered GY-906 MLX90614 BAA Non-touch Infrared Temperature Sensor Module
9 in stock
QUICK OVERVIEW
- Small size, low cost
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder
jumpers - Easy to integrate
- Factory calibrated in wide temperature range:(-40 … + 125 ° C for sensor temperatur and -70 … + 380 ° C for object temperature).
65.00 SAR
9 in stock
GY-906 MLX90614 non-contact Infrared Temperature Sensor Module MLX90614ESF IIC I2C.
GY-906 MLX90614ESF is a non-contact infrared thermometer for Arduino, or any microcontroller that can communicate with it through it’s I2C interface. This sensor comes with a breakout board with all of the components needed for operation and two types of pins.They are unsoldered..
Small size, low cost; Mounted on a breakout board with two types of pins; 10k Pull up resistors for the I2C interface with optional solder jumpers; Easy to integrate. Measurement resolution of 0.02 DEGREE..
Factory calibrated in wide temperature range: -40 … + 125 C for sensor temperature and -70 … + 380 C for object temperature. High accuracy of 0.5 C over wide temperaturerange (0 … + 50 C for both Ta and To) High (medical) accuracy calibration..
SMBus compatible digital interface; Customizable PWM output for continuousreading; Simple adaptation for 8 … 16V applications. Sleep mode for reduced power consumption; Different package options for applications andmeasurements versatility;Automotive grade.
X2pcs GY-906 MLX90614 non-contact Infrared Temperature Sensor
Module MLX90614ESF IIC I2C
GY-906 MLX90614ESF is a non-contact infrared thermometer for
Arduino, or any microcontroller that can communicate with it
through it’s I2C interface. This sensor comes with a breakout
board with all of the components needed for operation and two
types of pins. They are unsoldered. Please indicate if you would
like one or the other soldered. There are two solder jumpers for
the I2C interface that may or may not need to be soldered
depending on your application, but will not for most uses.
Features:
- Small size, low cost
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder
jumpers - Easy to integrate
- Factory calibrated in wide temperature range:
-40 … + 125 ° C for sensor temperature and
-70 … + 380 ° C for object temperature. - High accuracy of 0.5 ° C over wide temperaturerange (0 … + 50 °
C for both Ta and To) High (medical) accuracy calibration - Measurement resolution of 0.02 ° C
- Single and dual zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuousreading
- Simple adaptation for 8 … 16V applications
- Sleep mode for reduced power consumption
- Different package options for applications andmeasurements
versatility
حسن (verified owner) –
حسن –
عماد م. (verified owner) –
عماد م. –
حسن السخي (verified owner) –
حسن السخي –
مجهول (verified owner) –
الجوده حلوه
مجهول –