Goot Soldering Paste BS-10

This GOOT BS-10 white solder paste is semi-solid. So, it is not easy to tip over. It features flux strong bright spot, low residue. It has a stable performance, volatile, long life cycle, the amount of provincial, non-toxic, odorless, safe to use and reliable. Ideal for both professional as well as hobby users.

How to use: 

Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered .Place the soldering iron tip over the leads.Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away.

Features:

•  good ointment flux, acid refining without flux, semi-solid is not easy to throw away.
•  strong flux, bright solder joints, low residue.
•  It has the effect of removing oxide for the gold-copper alloy substrate.
•  the flow with stable performance, volatile small, long life cycle, the amount of province, non-toxic, odorless,
• safe and reliable, this is to create high-quality electronic products, ideal auxiliary products, c is also supplies for maintenance engineers.

Specifications

• Model : BS-10
• Net content 10g
• Composition
• Vaseline : 80-90%
• Zinc chloride : 5%
• Water : 1-10%
• Paraffin : 1-10%
• Ammonium chloride : 1-5%

How to clean

Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion.

Package Include

• 1x  Goot Soldering Paste BS-10