4 Channel Relay Module,5V High and ,Trigger Relay Control
This is a 4-channel HIGH level trigger relay, applicable to Arduino and Raspberry Pi, Relays are suitable for driving high power electronic devices such as lights, electric fans and air conditions, There are two soldering points for 5V and GND at the two ends of the module. So you can just weld other relay modules to it and have a relay module of more channels, signals of which are independent of each other. You can just unplug the headers to disconnect the device with the module after the experiment and don’t need to unscrew the wires in the socket. Kindly reminder: Be careful with your fingers when unplugging the headers.
features
- Module DescriptioEach channel of the module can be jumpered to set a high level or a low level
- Fault tolerant design, even if the control line is broken, the relay will not move
- Power indicator (green), 4-way relay status indicator (red)
- The interface is user-friendly design, all interfaces can be directly connected through the terminal block, which is very convenient.
- Module size: 73mm * 50mm * 18.5mm (length * width * height)
- With 4 fixing bolt holes, 3.1mm hole, space between 67mm * 44.5mm
Package Include
- 1x 4 Channel Relay Module,5V High and Low Level Trigger Relay Control
Reviews
There are no reviews yet