ACS712 5A Range Current Sensor Module
In stock
🔥 79 already sold
QUICK OVERVIEW
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins
19.00 29.00
In stock
The 5A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage.
Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc.
This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current.
The maximum AC or DC that can be detected can reach 5A, and the present current signal can be read via analog I / O port of Arduino.
Note: The color of the product may vary. while shipping you may get any one of them.
Note:
ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!
Connection Diagram:
Features :
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
- 5.0 V, single-supply operation.
- 66 to 185 mV/A output sensitivity.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
- The ratiometric output from the supply voltage.
Package Includes :
1 x 5A Range Current Sensor Module ACS712.
| Current sensor chip | ACS712ELC-5A |
| Operating Voltage (V) | 4.5V ~ 5.5V DC |
| Measure Current Range | -5 ~ +5A |
| Sensitivity | 100mV/A |
| Length (mm) | 32 |
| Width (mm) | 13 |
| Height (mm) | 13.5 |
| Weight (gm) | 5 |
| Shipment Weight | 0.095 kg |
| Shipment Dimensions | 4 × 2 × 2 cm |
2 reviews for ACS712 5A Range Current Sensor Module
Related products
-
All Products, Sensors
Digital Sensor TTP223B Module Capacitive Touch Switch
QUICK OVERVIEW
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: NA061 -
All Products, Sensors
DHT11 Temperature And Humidity Sensor Module
QUICK OVERVIEW
- Input Supply Voltage (VDC): 3.3 ~ 5.
- Supply Current (mA): measurement 0.3mA standby 60μA.
- Temperature measurement range: 0~50 degrees.
- Temperature measurement error: ±2 degrees.
- Humidity measurement range: 20%~95%RH.
- Humidity measurement error: ±5%RH.
SKU: AB029 -
All Products, Sensors
TCRT5000 Single Channel Line Tracking Sensor Module
QUICK OVERVIEW
- Operating Voltage: 3-5.5V
- Supply Current: ≥ 20mA
- Optimal Sensing Distance: 3mm
- Working voltage of 5V, the output of the black line low, white line of high output
- Uses Infrared Light to Detect Anti-Interference Ability
- Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
- Exquisite workmanship, with the indicator
- Has a fixed bolt hole for easy installation
SKU: AB005
مجهول (verified owner) –
مجهول –
تركي المطيري (verified owner) –
تركي المطيري –