,

DHT11 Temperature And Humidity Sensor Module

(7 customer reviews)
Availability:

78 in stock

QUICK OVERVIEW

  1. Input Supply Voltage (VDC): 3.3 ~ 5.
  2. Supply Current (mA): measurement 0.3mA standby 60μA.
  3. Temperature measurement range: 0~50 degrees.
  4. Temperature measurement error: ±2 degrees.
  5. Humidity measurement range: 20%~95%RH.
  6. Humidity measurement error: ±5%RH.

24.00 SAR

If ordered today we estimate delivery by 21, April 2024 inside KSA , direct branch pick up available in Al Ahsa

78 in stock

The DHT11 Humidity & Temperature Sensor Module is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and outputs a digital signal on the data pin (no analog input pins needed). Its very simple to use, and libraries and sample codes are available for Arduino and Raspberry Pi.

This DHT11 Humidity & Temperature Sensor Module makes is easy to connect to an Arduino or microcontroller as it includes the pull-up resistor required to use the sensor. Only three connections are required to be made to use the sensor – Vcc, Gnd, and Output. We have also included the cables required to connect the DHT11 to a microcontroller.

Features:

  1. Low-cost Module.
  2. 5V power and I/O.
  3. 2.5mA max current use during conversion (while requesting data).
  4. Good for 20-80% humidity readings with 5% accuracy.
  5. Good for 0-50°C temperature readings ±2°C accuracy.
  6. No more than 1 Hz sampling rate (once every second).
  7. It comes with cables to make connections to a microcontroller.

Package Includes:

1 x DHT11 Temperature And Humidity Sensor Module.

SKU: AB029 Categories: ,
Model DHT11
Input Supply voltage (VDC) 3.3 ~ 5
Supply Current (mA) measurement 0.3mA standby 60μA
Temperature range (°C) 0 ~ 50
Temperature measurement error ±2°C
Humidity measurement range 20% ~ 95%RH
Humidity measurement error ±5%RH
Resolution 16 Bit
Output form Digital output
Length (mm) 28
Width (mm) 13.5
Height (mm) 7
Weight (gm) 448
5
Shipment Weight 0.01 kg
Shipment Dimensions 5 × 4 × 3 cm

7 reviews for DHT11 Temperature And Humidity Sensor Module

  1. Arabic

    Anwar Jamal (verified owner) –

    Anwar Jamal –

  2. Arabic

    m.alamri-20 (verified owner) –

    اذا فيه كود اردوينو احتاج ضروري اكتبوه فالوصف مثل حساس الحراره الثاني المستقل

    m.alamri-20 –

  3. Arabic

    عماد م. (verified owner) –

    عماد م. –

  4. Arabic

    Abdulelah (verified owner) –

    Abdulelah –

  5. Arabic

    haidar almubarak (verified owner) –

    مبدعين في توفير الادوات التي تساعد الطلاب على انجاز مشاريعهم

    haidar almubarak –

  6. Arabic

    مجهول (verified owner) –

    مجهول –

  7. Arabic

    ريان (verified owner) –

    ريان –

Show only reviews in English (0)

Add a review

Your email address will not be published. Required fields are marked *

Related products

هل لديك اي استفسارات؟ اتصل بنا الآن 00966135837552
معلومات التواصل
info@ielectrony.com
مدينة الأحساء - المنطقة الشرقية
المملكة العربية السعودية
© انا الكتروني - جميع الحقوق محفوظة
هل لديك اي استفسارات؟ اتصل بنا الآن 00966135837552