All Products, Sensors
IR Obstacle Avoidance Sensor Module
Availability:
In stock
🔥 1026 already sold
QUICK OVERVIEW
- There is an obstacle, the green indicator light on the circuit board
- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
23.00
In stock
Infrared Obstacle Avoidance IR Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED comes to life.
The module features a 3 wire interface with Vcc, GND and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine-tune the range of operation, effective distance range is 2cm to 80cm.
Features:
- Easy to assemble and use
- Onboard detection indication
- The effective distance range of 2cm to 80cm
- A preset knob to fine-tune distance range
- There is an obstacle, the green indicator light on the circuit board.
Package Includes :
1 x Infrared Obstacle Avoidance IR Sensor Module.
| Main Chip | LM393 |
| Operating Voltage Range | 3.6~5 VDC |
| Average Current Consumption (mA) | 0.06 |
| Detection Angle | 35 ° |
| Distance Measuring Range | 2 ~ 30cm |
| Dimensions (mm) LxWxH | 48 x 14 x 8 |
| Weight (gm) | 5 |
| Shipment Weight | 0.135 kg |
| Shipment Dimensions | 5 × 4 × 1 cm |
10 reviews for IR Obstacle Avoidance Sensor Module
Related products
-
All Products, Sensors
MAX485 TTL To RS485
QUICK OVERVIEW
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
SKU: AA119 -
All Products, Audio products, Sensors
LM393 Sound Detection Sensor Module
QUICK OVERVIEW
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound
SKU: AA111 -
All Products, Audio products, Sensors
Analog Sound Sensor Microphone Module
QUICK OVERVIEW
- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
SKU: AA241 -
All Products, Sensors
Voltage Sensor Detection Module
QUICK OVERVIEW
- You can also use the IICLCD1602 LCD to display voltage.
- By 3P connector, connect this module with the expansion of board Arduino
- Voltage input range: DC 0-25 V
- Voltage detection range: DC 0.02445 V to 25 V
- Voltage analog resolution : 0.00489 V
SKU: AA118
مجهول (verified owner) –
اعجبتني سرعة تسليم الطلب لشركة الشحن
مجهول –
مجهول (verified owner) –
مجهول –
Abody (verified owner) –
Abody –
أحمد حكمت (verified owner) –
أحمد حكمت –
Eng Gno (verified owner) –
فنان
Eng Gno –
Adal (verified owner) –
Adal –
Adal (verified owner) –
Adal –
مازن صديق (verified owner) –
مازن صديق –
Rahaf A. (verified owner) –
Rahaf A. –
ielectrony Support Team (store manager) –
شكرا على مشاركتك ?
ielectrony Support Team –
ريم داود (verified owner) –
ماشاءالله خدمة سريعه ونفس الي طلبت بالضبط
ريم داود –