Motors & Drivers, All Products
Robot Smart Car DC motor DIY 3- 6V Grade A
Availability:
173 in stock
Quick Overview:
- Robot Smart Car DC motor DIY 3-6V Grade A
- Reduction Ratio 1:48
- Rotate Speed 125rpm/min
- Voltage: 3-6VDC
- Current: 80-150mA
- No Load Speed: 3V-125 rev/min5V-200 rev/min6V-230 rev/min
- Load Speed: 3V-95 rev/min5V-160 rev/min6V-175 rev/min
- Output Torque: 3V-0.8kg.cm5V-1.0kg.cm6V-1.1kg.cm
11.50 SAR
If ordered today we estimate delivery by 21, April 2024 inside KSA , direct branch pick up available in Al Ahsa
173 in stock
-
Motors & Drivers, All Products
Robot Smart Car DC motor DIY 3- 6V Grade A
Quick Overview:
- Robot Smart Car DC motor DIY 3-6V Grade A
- Reduction Ratio 1:48
- Rotate Speed 125rpm/min
- Voltage: 3-6VDC
- Current: 80-150mA
- No Load Speed: 3V-125 rev/min5V-200 rev/min6V-230 rev/min
- Load Speed: 3V-95 rev/min5V-160 rev/min6V-175 rev/min
- Output Torque: 3V-0.8kg.cm5V-1.0kg.cm6V-1.1kg.cm
SKU: AD014
21.50 SAR for 2 item(s)
Robot Smart Car DC motor DIY 3- 6V Grade A
- DC Gear Motor Dual Shaft DIY Kit for Arduino Smart Car Robot
- Operating Voltage: 3V ~ 6V DC
- No-Load Current: 60-180 mA
- Gear Reduction Ratio 1:48
- It has an anti-interference ability with EMC
- Rated Torque:0.5kgf.cm
3 reviews for Robot Smart Car DC motor DIY 3- 6V Grade A
Related products
-
Motors & Drivers, All Products
L9110 L9110S DC Stepper Motor Driver Board HBridge
QUICK OVERVIEW
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
SKU: AA110 -
-
Integrated Circuits, Motors & Drivers, All Products
ULN2003 Driver DARL DIP-16
QUICK OVERVIEW
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
SKU: AC085 -
Motors & Drivers, All Products
L293D Motor Driver/Servo Shield for Arduino
QUICK OVERVIEW
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AA031
خالد الحيسوني (verified owner) –
يحتاج تلحيم الاسلاك
خالد الحيسوني –
مازن صديق (verified owner) –
مازن صديق –
Mohammed Badawi (verified owner) –
Mohammed Badawi –