-
All Products, Arduino
IIC I2C Logic Level Converter Bi- Directional Module 5V to 3.3V for Arduino
Quick Overview
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
- Level Converter- 4 ChannelCompatible with the bread plate, can be used directly put on the breadboar
SKU: NA019 -
All Products
Soldering Service 1
By purchasing this service, you will receive a soldering service for 1 electronic board. You can increase the quantity to increase the required boards in order to match the amount of boards you want to solder.
This service is suitable for soldering between 1 and 10 points (pins or wires) for each electronic board.
SKU: SLDR01
IIC I2C Logic Level Converter Bi- Directional Module 5V to 3.3V for Arduino
22 in stock
Quick Overview
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
- Level Converter- 4 ChannelCompatible with the bread plate, can be used directly put on the breadboar
26.00 SAR
22 in stock
IIC I2C Logic Level Converter Bi- Directional Module 5V to 3.3V for Arduino
This Level Converter- 4 Channel features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels.The logic level converter circuit convert signals as low as 1.8 V to as high as 5 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including IC, SPI, and asynchronous TTL serial. If you have ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be? A bi-directional Level Converter- 4 Channel is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time.
How to use
- High voltage (5V for example) to the HV pin
- Low voltage (3.3V for example) to LV
- Gound from the system to the GND pin.
Features
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
- Level Converter- 4 ChannelCompatible with the bread plate, can be used directly put on the breadboard
- 4 Channel Module (great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, NXP Mbed
Package Include
- 1x IIC I2C Logic Level Converter Bi- Directional Module 5V to 3.3V for Arduino
Number of Channels | 4 |
Voltage on Lx Side | 1.8V-5V |
Voltage on Hx Side | 2.8V-6V |
Power | 2.8V – 6V |
Length (mm) | 16 |
Width (mm) | 13 |
Height (mm) | 3 |
Weight (gm) | 2 |
Shipment Weight | 0.085 kg |
Shipment Dimensions | 8 × 5 × 2 cm |
Reviews
There are no reviews yet.