,

Active Alarm Buzzer Driver Module

(1 customer review)
Availability:

47 in stock


QUICK OVERVIEW

  1. Operating Voltage : 1.5 ~ 15V DC
  2. Working Current: Less than 25mA
  3. Tone Generation Range : 1.5 ~ 2.5kHz
  4. Dimensions (LxWxH):  26 x 15 x 11 mm

8.00 SAR

If ordered today we estimate delivery by 31, March 2024 inside KSA , direct branch pick up available in Al Ahsa

47 in stock

Passive Buzzer Module is a built-in construction of digital transducers, DC energy provides, extensively utilized in computer systems, printers, copiers, alarms, digital toys, car digital apparatus, phones, timers and different digital electronics projects for Alert sound.

 This PCB Mounted Passive Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.

This module is ideally suited to adding noise to your project and is compatible with a pin pitch of 2.54mm while functioning with microcontrollers such as the Arduino. This module lets you respond to programmatic changes with a lovely annoying buzzer that can be altered over a range of frequencies to ensure maximum irritation.
To operate the I/O pin must receive a square wave to trigger the buzzer. This can be produced within all popular microcontrollers.

The following Arduino Sample sketch will generate two different tones by turning on and off the buzzer at different frequencies using a delay.

int buzzer = 8; // set the buzzer control digital IO pin 
void setup() { 
pinMode(buzzer, OUTPUT); // set pin 8 as output
 }
void loop() { 
for (int i = 0; i < 80; i++) { 
     digitalWrite(buzzer, HIGH); // make a sound
     delay(1); // send high signal to buzzer
     digitalWrite(buzzer, LOW); // delay 1ms
     delay(1); // send low signal to buzzer 
                             }
 delay(50);
 for (int j = 0; j < 100; j++) { 
     digitalWrite(buzzer, HIGH);  //make another sound 
     delay(2);
     digitalWrite(buzzer, LOW); // delay 2ms 
     delay(2);
                               }
 delay(100); 
}

Connection Diagram:

Passive Buzzer Module

Connections:
  • Arduino: Buzzer
  • GND: (minus sign)
  • Center pin: No connection
  • Any digital pin: S

Specifications and Features:

  1. Operating Voltage : 1.5 ~ 15V DC
  2. Working Current: Less than 25mA
  3. Material: Plastic
  4. Tone Generation Range : 1.5 ~ 2.5kHz
  5. Dimensions (LxWxH):  26 x 15 x 11 mm
  6. Colour: Black
  7. Weight: 3g

Package Includes:

1 x PCB Mounted Passive Buzzer Module

SKU: AB011 Categories: ,
Operating Voltage 1.5 ~ 15V DC
Operating Current <25mA
Tone Generation Range (kHz) 1.5 ~ 2.5
Length (mm) 15
Width (mm) 19.7
Height (mm) 10
Weight (gm) 1 (approx)
Shipment Weight 0.085 kg
Shipment Dimensions 6 × 4 × 2 cm

1 review for Active Alarm Buzzer Driver Module

  1. Arabic

    نهى العنزي (verified owner)

    نهى العنزي

Show only reviews in English (0)

Add a review

Your email address will not be published. Required fields are marked *