-
-
All Products
Soldering Service 1
By purchasing this service, you will receive a soldering service for 1 electronic board. You can increase the quantity to increase the required boards in order to match the amount of boards you want to solder.
This service is suitable for soldering between 1 and 10 points (pins or wires) for each electronic board.
SKU: SLDR01
GY-61 ADXL335 3-axis accelerometer
24 in stock
quick OverView:
- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
39.00 SAR
24 in stock
GY-61 ADXL335 3-axis accelerometer
The ADXL335 is a small, thin, low power, a complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. This breakout board comes with an onboard voltage regulator and works at both 3.3V & 5V (3-5V).
An accelerometer is an electro-mechanical device that will measure acceleration forces. These forces may be static, like the constant force of gravity pulling at your feet, or they could be dynamic – caused by moving or vibrating the accelerometer.
Applications :
- FPV, RC and Robots systems
- GPS navigation systems
- Impact recognition and logging
- Gaming and virtual reality input devices
- Motion-activated functions
- Intelligent power saving for handheld devices
- Vibration monitoring and compensation
- Free-fall detection
- 6D-orientation detection
Features :
- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- All sensors connected to the I2C bus
- You can easily select two I2C address for MPU6050 by soldered jumper
- Power LED
- Build in Logic level converter for I2C
- Designed for 5V logic level
Package Includes :
1 X ADXL335 3-axis Analog Output Accelerometer Module angular transducer 3v-5v
Supply Voltage (V) 3 to 6
Each Axis Bandwidth 50Hz
Operating Temperature (°C) -40 to +90
Length (mm) 21
Width (mm) 16
Height (mm) 2.5
Weight (gm) 0.6
Shipment Weight 0.085 kg
Shipment Dimensions 4 × 3 × 1 cm
Reviews
There are no reviews yet