Soldering Tools, All Products
Soldering Wire Fine Solder Japan 0.8mm 250g
Availability:
4 in stock
QUICK OVERVIEW
- Material: Tin /Lead ratio 60/40
- Wire Diameter: 0.8mm
- Flux: 1.8%
- Item weight: 250g
- SWG:21
- Made In Japan
90.00 SAR
If ordered today we estimate delivery by 28, April 2024 inside KSA , direct branch pick up available in Al Ahsa
4 in stock
-
Soldering Tools, All Products
Soldering Iron 40W model KS-40R/22
QUICK OVERVIEW
- Output Power: 40 Watt
- High-Quality Heavy Nickel-Copper plated Bit
- Advanced Heating element for long-life performance
- Constant Tip temperature
- The Soldering Iron Quickly attains a working temperature
- The product model is KS-40R/22
- The product is made in Japan
SKU: KS40R -
All Products, Soldering Tools
Soldering paste 50g – yellow in color
QUICK OVERVIEW
- Net Content: 50g
- Paste Color: Yellow
- Does not create High Smoke
- Does not create Foul/Bad Smell
- No Residual Waste
- High-Quality Soldering Additives & Activators for effective soldering
- Useful for general purpose soldering, electrical wires, components, and cables etc
SKU: SP001
179.00 SAR for 3 item(s)
This soldering wire has good solderability, insulation resistance, no spattering, and non-corrosive. Widely used in electrical and electronics, solder parts like a circuit board, electronics devices, and others.
Specifications and Features:
- Material: Tin /Lead ratio 60/40
- Wire Diameter: 0.8mm
- Flux: 1.8%
- Item weight: 250g
- Have been treated by special technology with oxide removal and antioxidant bearing.
- Easy to use, flows well, and heats evenly.
- Good solderability both in electrical conductivity and thermal conductivity.
- High activity flux makes more reliable soldering and leaves bright shiny solder joints after reflow.
- With the solder wire reel, soldering can be accomplished quickly.
- Widely applied in electrical repairs
- Made in Japan
Package includes:
1 x Soldering Wire Fine Solder Japan 0.8mm 250g
| Material | Tin |
| Wire Diameter (mm) | 0.8 |
| Flux (%) | 1.8 |
| Width (mm) | 55 (Body Diamter) |
| Height (mm) | 29 |
| Weight (gm) | 250 |
| Shipment Weight | 260 gm |
| Shipment Dimensions | 6 × 6 × 5 cm |
Related products
-
-
Arduino, Motors & Drivers, All Products
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino, Motors & Drivers, All ProductsCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: AA153 -
Motors & Drivers, All Products
L293D Motor Driver/Servo Shield for Arduino
QUICK OVERVIEW
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AA031 -
Arduino, All Products
Arduino UNO R3 Acrylic Case
QUICK OVERVIEW
- For Arduino UNO R3 Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
SKU: AC011
2 reviews for Soldering Wire Fine Solder Japan 0.8mm 250g
There are no reviews yet