-
جميع المنتجات, مواتير ودرايفرات
لوحة تطوير ملحقات متعددة القنوات PCA9548A 8 Channel I2C Multiplexer Expansion Board
جميع المنتجات, مواتير ودرايفراتلوحة تطوير ملحقات متعددة القنوات PCA9548A 8 Channel I2C Multiplexer Expansion Board
لمحة سريعة
- تيار الاستعداد المنخفض .
- 1 إلى 8 مفاتيح ترجمة ثنائية الاتجاه.
- متوافق مع I2C Bus و SMBus.
- مدخلات متسامحة 5-V.
- أداء المزلاج يتجاوز 100 مللي أمبير لكل JESD 78 ، الفئة الثانية.
SKU: NA339 -
لوحة تطوير ملحقات متعددة القنوات PCA9548A 8 Channel I2C Multiplexer Expansion Board
5 متوفر في المخزون
لمحة سريعة
- تيار الاستعداد المنخفض .
- 1 إلى 8 مفاتيح ترجمة ثنائية الاتجاه.
- متوافق مع I2C Bus و SMBus.
- مدخلات متسامحة 5-V.
- أداء المزلاج يتجاوز 100 مللي أمبير لكل JESD 78 ، الفئة الثانية.
39.00 ر.س
5 متوفر في المخزون
Overview
- PCA9548A
- Voltage range: 2.3V to 5.5V
- Up to eight (8) available ports
- Configurable address (0x70 to 0x77, see below)
- PTSolns Customer Support – Your satisfaction matters to us. Please contact us for troubleshooting help or any other concerns you may have.
Connecting multiple sensors or modules on the same I2C bus, all with the same address, can be achieved by using this PCA9548A module. The module multiplexes the address over eight (8) available ports. In this manner, one can interface, for example, up to eight of the same modules (all with the same inherent address).
As an example application, consider the following. The ADXL345 accelerometer has an inherent, and fixed, address of 0x53. This cannot be changed. If wanting to connect multiple of these modules onto a single I2C bus, one would have to use something similar to the PCA9548A module. In this example, two ADXL345 are connected on Port 0 and Port 1. We chose to pull A0 HIGH and A1, A2 LOW to set address 0x71. The pin connects are straight-forward – just read the SDA and SCL labels on the modules and match them up! Supply Vin and GND and you’re good to go. You can use any microcontroller you wish, as long as the operating voltage is between 2.3V and 5.5V.
PCA9548A Address
The PCA9548A has a configurable address range of 0x70 to 0x77, but either pulling LOW (to GND) or pulling HIGH (to input voltage) the three pins A0, A1 and A2. Please consult the table below for address configuration.
Address | A0 | A1 | A2 |
0x70 | Low | Low | Low |
0x71 | High | Low | Low |
0x72 | Low | High | Low |
0x73 | High | High | Low |
0x74 | Low | Low | High |
0x75 | High | Low | High |
0x76 | Low | High | High |
0x77 | High | High | High |
TCA9548A vs. PCA9548A
What is the difference between the TCA9548A and the PCA9548A? Mainly, the PCA9548A has an input voltage range of 2.3V to 5.5V, whereas the TCA9548A can go as low as 1.65V. Besides that, they are very much the same.
Package Contents
- 1x PCA9548A modules
- 2pcs 1×12 Pin Male Header (soldering required)
Input Voltage (Volt) | 1.65 – 5.5 |
Clock Frequency (kHz) | 0 – 400 |
Dimensions (mm) | 22 x 32 x 2.7 |
Weight (gm) | 4 |
Shipment Weight | 0.095 kg |
Shipment Dimensions | 4 × 4 × 3 cm |
المراجعات
There are no reviews yet