,

IC74LS76

(1 customer review)
Availability:

388 in stock


Quick Overview:
  • Operating Voltage: 2V to 6V
  • Minimum High Level Input Voltage: 2 V
  • Maximum Low Level Input Voltage: 0.8 V
  • Minimum High Level Output Voltage: 3.5 V

5.00 SAR

If ordered today we estimate delivery by 31, March 2024 inside KSA , direct branch pick up available in Al Ahsa

388 in stock

IC74LS76

The 74LS76 offers individual J, K, Clock Pulse, Direct Set, and Direct Clear inputs. These dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will be accepted.

Pin Description of 74LS76:
Pin Number

Pin Name

Description

5

Vcc

Powers the IC typically with 5V

13

Ground

Connected to the ground of the system

JK Flip Flop – 1 / JK Flip Flop – 2

1,6

Clock-1/ Clock-2

These pins must be provided with clock pulse for the flip flop

2,7

Preset-1 / Preset-2

Preset input pin drives Flip Flop to a set state.

16, 12

1K/ 2K

Input pin of the Flip Flop

4,9

1J / 2J

Another Input pin of the Flip Flop

14, 10

1Q(bar) / 2Q (bar)

Inverted output pin of Flip Flop

15,11

1Q / 2Q

Output Pin of the Flip Flop

3,8

1 CLR (bar)/ 2 CLR (bar)

Clear input pin drives Flip Flop to a reset state.

Features of 74LS76:
  • Dual JK Flip Flop Package IC
  • Operating Voltage: 2V to 6V
  • Minimum High Level Input Voltage: 2 V
  • Maximum Low Level Input Voltage: 0.8 V
  • Minimum High Level Output Voltage: 3.5 V
  • Maximum Low Level Output Voltage: 0.25V
  • Operating Temperature -55 to -125°C
  • Available in 14-pin PDIP, GDIP, PDSO packages
    Note: Complete Technical Details can be found at the 74LS76 datasheet give at the end of this page.

Equivalent for 74LS76: 74LS73, MC74HC73A, SN7476

Alternatives JK Flip-Flop: 74LS107, 4027B

Where to use 74LS76 JK Flip-Flop:

The 74LS76 is a dual in-line JK flip flop IC. Meaning it has two JK flip flops inside it and each can be used individually based on our application. The JK flip flops are considered to be the most efficient flip-flop and can be used for certain applications on its own. The flip-flops are also called latching devices meaning it can remember one single bit of data and latch the output based on it, due to this property they are commonly used as shift registers, control registers, storage registers or where ever a small memory is required. More than one Flip Flop can be used in series to act as an EEPROM for holding a small amount of data. The JK flip flop is considered to be more suitable for practical application because of its truth table that is the output of the flip flop will be stable for all types of inputs.

So if you are looking for an IC for latching purpose or to act as a small programmable memory for you project then this IC might be the right choice for you

Applications of 74LS76
  • Shift Registers
  • Memory/Control Registers
  • EEPROM circuits
  • Latching devices
SKU: ENY30 Categories: ,

1 review for IC74LS76

  1. Arabic

    Yasir (verified owner)

    وصل المنتج تغليف ممتاز جدا

    Yasir

Show only reviews in English (0)

Add a review

Your email address will not be published. Required fields are marked *