Sensors, All Products
HC-SR501 PIR Motion Sensor Module
Availability:
82 in stock
QUICK OVERVIEW
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
25.00 SAR
If ordered today we estimate delivery by 21, April 2024 inside KSA , direct branch pick up available in Al Ahsa
82 in stock
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor.
The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer.
Note: The Product available in Two colours Blue and Green, therefore packing you may get any one of them.
Features :
- Infrared Sensor with Control Circuit Board
- The Sensitivity and Holding Time is adjustable.
- Blockade time: 2.5s (Default)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).
Package Includes :
1 x PIR Motion Sensor Detector Module HC-SR501
| Model | PIR HC-SR501 |
| Operating Voltage Range | DC4.5-20V |
| Average Current Consumption (mA) | <60uA |
| Distance Measuring Range | 3 to 7m (can be adjusted) |
| Output Type | (High/ Low-level Signal) 3.3V TTL output |
| Dimensions (mm) LxWxH | 32 x 24 x 18 |
| Weight (gm) | 10 |
| Working Temperature Range | -20°C ~ 80°C |
| Detection Angle | <140° |
| Delay Time | 5 to 200s (Can be Adjusted, Default 5s +/- 3%) |
| Shipment Weight | 0.135 kg |
| Shipment Dimensions | 4 × 3 × 1 cm |
9 reviews for HC-SR501 PIR Motion Sensor Module
Related products
-
Sensors, All Products
801S Vibration Shock Sensor Module
QUICK OVERVIEW
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: NA059 -
Sensors, Audio products, All Products
LM393 Sound Detection Sensor Module
QUICK OVERVIEW
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound
SKU: AA111 -
Sensors, All Products
MAX485 TTL To RS485
QUICK OVERVIEW
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- Slew-rate limited transceiver
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
- All Chip pins are brought out for proper controls
SKU: AA119
مجهول (verified owner) –
مجهول –
Zainab (verified owner) –
ممتاز كما في الصورة بالضبط
Zainab –
مجهول (verified owner) –
جيد
مجهول –
Mohamed elsayed (verified owner) –
Mohamed elsayed –
مها س. (verified owner) –
ممتاز
مها س. –
الحسين ا. (verified owner) –
الحسين ا. –
عبدالمجيد السليماني (verified owner) –
عبدالمجيد السليماني –
مجهول (verified owner) –
مجهول –
مجهول (verified owner) –
مجهول –