Fast Delivery Inside KSA
99% Positive Feedbacks
365 days Service
Payment System
Only Best Brands
Product Carousel Tabs
Raspberry Pi
Raspberry Pi 3 – Model B with Onboard WiFi and Bluetooth
QUICK OVERVIEW
RAM: 1GB
Processor: Broadcom BCM2387 chipset 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
Storage : SD/MMC/SDIO
Power: 5V / 700mA~3A via micro USB
SKU: RA432
Sensors
Double speed encoder measuring module
QUICK OVERVIEW
HC-020K speed measuring sensor is a wide voltage, high resolution, short response time, and the switch output speed measurement module. It can test motor s rotational speed with black encoder (measured spec. is related to the encoder, the inner diameter of D type encoder that provided is 4mm, can be used for motor output shaft w/4mm diameter, which is TT motor we matched, yellow shell and white axis).
SKU: ND038
Motors & Drivers
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
Latest Arduino CNC Shield Version 3.10
GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
Coolant enable
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design.
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
SKU: AA153
Arduino
Arduino UNO R3 Acrylic Case
QUICK OVERVIEW
For Arduino UNO R3 Development Board only.
With screw copper pillar and installation instructions.
To protect your little computer against damages, dust and scratches Clear Top and Bottom.
This case provides easy access to all ports.
It requires no tools for easy assembly and disassembly.
Simply Clicks Together Enclosure.
SKU: AC011
Products Carousel
Television Entertainment
Electronics
Ardiuno & Learning Kits
Recently Viewed
Motors & Drivers
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
Latest Arduino CNC Shield Version 3.10
GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
Coolant enable
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design.
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
SKU: AA153
Arduino
Arduino UNO R3 Acrylic Case
QUICK OVERVIEW
For Arduino UNO R3 Development Board only.
With screw copper pillar and installation instructions.
To protect your little computer against damages, dust and scratches Clear Top and Bottom.
This case provides easy access to all ports.
It requires no tools for easy assembly and disassembly.
Simply Clicks Together Enclosure.
SKU: AC011
Arduino
Ethernet W5100 Shield Network Expansion Board for Arduino
QUICK OVERVIEW
Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
Stackable Design, can directly be supported by for Arduino official Ethernet Library.
Supports up to four simultaneous socket connections
Can be used to store files for serving over the network.
Can be accessed using the Mini SD TF library.
IEEE802.3af compliant
Low output ripple and noise (100mVpp)
Overload and short-circuit protection
SKU: AA009
Motors & Drivers
L293D Motor Driver/Servo Shield for Arduino
QUICK OVERVIEW
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
Can run motors on 4.5VDC to 25VDC.
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AA031
Arduino
DS1302 RTC Real Time Clock Module with Battery
QUICK OVERVIEW
The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
SKU: AA122
Motors & Drivers
Servo MG996 13KG 180 degree
QUICK OVERVIEW
Weight: 55g
Dimension: 40.7×19.7×42.9mm
Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
Operating voltage: 4.8 ~ 6.6V
Gear Type: Metal gear
Dead band width: 1us
Wire length: 32cm
SKU: AA023
Motors & Drivers
Servo MG996 13KG 360 degree
QUICK OVERVIEW
Weight: 55g
Dimension: 40.7×19.7×42.9mm
Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
Operating voltage: 4.8 ~ 6.6V
Gear Type: Metal gear
Dead band width: 1us
Wire length: 32cm
SKU: AA229
Relays & Contactors
5V Dual Channel Relay Module
QUICK OVERVIEW
Low Level Trigger Relay Module
Two separate LEDs for On/Off indication of the Relay.
Triggering input voltage 3.3V – 5V
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Back EMF protection 2 LEDs to indicate when relays are ON.
Works with logic level signals from 3.3V or 5V devices
Opto isolation circuitry
Module with diode current protection, short response time
AC Control Voltage: 250V @max.10A
DC Control Voltage: 30V @max. 10A
SKU: AA025
