,

water flow sensor arduino

(1 customer review)
Availability:

9 in stock


QUICK OVERVIEW

  1. Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
  2. Max current draw: 15mA @ 5V.
  3. Working Flow Rate: 1 to 30 Liters/Minute.
  4. Maximum water pressure: 2.0 MPa.
  5. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate

45.00 SAR

If ordered today we estimate delivery by 21, April 2024 inside KSA , direct branch pick up available in Al Ahsa

9 in stock

This is YF-S201 Water Flow meter Measurement Sensor with 1-30Leter/min Flow Rate in black colour. This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There’s an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry.

By counting the pulses from the output of the sensor, you can easily calculate water flow. Each pulse is approximately 2.25 millilitres.

Note this isn’t a precision sensor, and the pulse rate does vary a bit depending on the flow rate, fluid pressure, and sensor orientation. It will need careful calibration if better than 10% precision is required. However, it’s great for basic measurement tasks!

We have an example Arduino sketch(check the ATTACHMENTS tab) that is useful to quickly test the sensor; it will calculate the approximate flow of water in liters/hour. The pulse signal is a simple square wave so it’s quite easy to log and convert into liters per minute using the following formula.

To know how to use water flow meter click here!

Connection

Red wire: +5V
Black wire: GND
Yellow wire: PWM output


Features :

  1. The simple and compact module.
  2. Easy to Install.
  3. High Sealing Performance.
  4. High-Quality Hall Effect Sensor.

Package Includes :

1 x YF-S201 Water Flow meter Measurement Sensor with 1-30Liter/min Flow Rate – Black.

SKU: NB031 Categories: ,
Model YF-S201
Working Voltage (V) 5 ~ 18
Max current draw 15mA @ 5V
Working Flow Rate (Liters/Minute) 1 ~ 30
Operating Temperature range (℃) -25 ~ +80
Operating Humidity Range 35% – 80% RH
Accuracy ±10%
Maximum water pressure 2.0 MPa
Output duty cycle 50% +-10%
Output rise time (µsec) 0.04
Pulses per Liter 450
Output fall time (µsec) 0.18
Outer diameter (mm) 20
Intake diameter (mm) 11
Outlet diameter (mm) 11
Length (mm) 62.5
Width (mm) 36
Height (mm) 35
Weight (gm) 50
Shipment Weight 0.145 kg
Shipment Dimensions 9 × 6 × 6 cm

1 review for water flow sensor arduino

  1. Arabic

    Abdulrahman Mohammed (verified owner)

    نفس المقاس

    Abdulrahman Mohammed

    Image #1 from Abdulrahman Mohammed

Show only reviews in English (0)

Add a review

Your email address will not be published. Required fields are marked *