-
All Products, Wireless devices
NEO-6M GPS Module
QUICK OVERVIEW:
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
This Item is not Applied to Return and Exchange Policy, Please Read the description
SKU: NA058 -
All Products
Soldering Service 1
By purchasing this service, you will receive a soldering service for 1 electronic board. You can increase the quantity to increase the required boards in order to match the amount of boards you want to solder.
This service is suitable for soldering between 1 and 10 points (pins or wires) for each electronic board.
SKU: SLDR01
NEO-6M GPS Module
3 in stock
QUICK OVERVIEW:
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
This Item is not Applied to Return and Exchange Policy, Please Read the description
59.00 SAR
3 in stock
Note: This Item is not subject to return or exchange Policy,When purchasing this Item, the store is not responsible in the event that it does not work and does not collect the satellite signal at the customer’s site. We also thank customers for their understanding that this Item is not a final product, but It is open source, programmable, and it is modified and welded, which makes it difficult for the store to give any guarantees related to the product, and the store’s technical team recommend using it at open spaces
NEO-6M GPS Module
This is a complete GPS module that is based on the Ublox NEO 6M GPS. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket.
A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
NOTE: Ublox NEO-6M GPS Module IS NOT COMPATIBLE WITH APM 2.8 FLIGHT CONTROLLER
Features:
5Hz position update rate
Operating temperature range: -40 TO 85°CUART TTL socket
EEPROM to save configuration settings
Rechargeable battery for Backup
The cold start time of 38 s and Hot start time of 1 s
Supply voltage: 3.3 V
Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
Separated 18X18mm GPS antenna
Useful Links:
For Arduino code Click here
Ublox 6 GPS Receiver and Protocol Description
Onboard M24C32-R (432RP marking) EEPROM datasheet
Onboard voltage regulator MIC5205 (marked KB33) datasheet
Arduino NEO-6M library
To connect Ublox Neo GPS module with Raspberry Pi Click here
Package Includes:
1 x Ublox NEO-6M GPS Board.
1 x Detachable Antenna.
عبدالعزيز النمري (verified owner) –
عبدالعزيز النمري –