Arduino
Showing 21–40 of 62 results
-
-
-
Arduino, All Products
SD Card Reading Writing Module for Arduino
v
QUICK OVERVIEW
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
SKU: AA114 -
Arduino, All Products
DS1302 RTC Real Time Clock Module with Battery
QUICK OVERVIEW
The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
SKU: AA122 -
-
All Products, Arduino, Breadboards & PCB
The Proto Screw Shield
Quick Overview:
- Arduino terminal to provide the IO, port connection.3.81 posts quality, reliable, convenient,
- durable.Combined with the Proto Shield, the middle can be used as a prototype expansion board.Double-
- sided PCB Prototyping extended area vias connecting the front sides can be welded components.The middle
- section can be placed small bread plate, convenient test extend
SKU: NA223 -
Arduino, Motors & Drivers, All Products
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Arduino, Motors & Drivers, All ProductsCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: AA153 -
All Products, Arduino, Batteries & Accessories
Dual 18650 Lithium Battery Shield V8 5V 2.2A 3V 1A Battery Charging Module Micro USB for Arduino
All Products, Arduino, Batteries & AccessoriesDual 18650 Lithium Battery Shield V8 5V 2.2A 3V 1A Battery Charging Module Micro USB for Arduino
Quick Overview
- Power Bank Battery Charging Module Micro USB for Arduino
- Voltage Outputs: Supports 3V/1A and 5V/2.2A
- Micro USB Charging Current: 600mA-800mA
- Supports up to two 18650 batteries
- Dimensions: 99.7mm x 48.2mm
SKU: NA694 -
All Products, Arduino
CJMCU-ADS1115 16 Bit Precision Analog-to-Digital Converter ADC Module Development Board
All Products, ArduinoCJMCU-ADS1115 16 Bit Precision Analog-to-Digital Converter ADC Module Development Board
Quick Overview
- wide power supply range: 2.0V to 5.5V.
- Low current consumption: Continuous mode: only 150 μA; Single shot mode: automatic shutdown
- Programmable Data Rate: 8SPS to 860SPS
- Internal Low-drift Voltage Reference
SKU: NA335 -
-
Arduino, All Products
LilyPad Arduino 328 main board
QUICK OVERVIEW
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: NA010 -
All Products, Arduino
IIC I2C Logic Level Converter Bi- Directional Module 5V to 3.3V for Arduino
Quick Overview
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
- Level Converter- 4 ChannelCompatible with the bread plate, can be used directly put on the breadboar
SKU: NA019 -
All Products, Arduino, Breadboards & PCB
Arduino Mega proto prototype shield V3.0 with 170 tie points solderless mini breadboard
All Products, Arduino, Breadboards & PCBArduino Mega proto prototype shield V3.0 with 170 tie points solderless mini breadboard
Quick Overview:
For for arduino MEGA / MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.
SKU: AA033 -
All Products, Arduino
ESP32-CAM-MB Micro USB Download Module for ESP32 CAM Development Board
Quick Overview
- This module is a programmer shield for the ESP32-CAM board, with GPIO connections.
- It uses the CH340G USB to serial chip for programming via the USB port on the shield.
- Suitable for IoT applications, home automation, wireless control, monitoring, and more.
- Supports WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards.
- Has 9 GPIO ports and 520KB SRAM plus 4MB PSRAM.
- Supports UART, SPI, I2C, PWM, and other interfaces.
- Comes with onboard PCB antenna and supports TF cards up to 4GB.
- Ch340 IC Driver: CH34x_Install_Windows_v3_4
- Dimensions: 40mm x 25mm x 10mm
- Weight: 6g
SKU: AH013 -