Product Carousel Tabs
Sensors
Double speed encoder measuring module
QUICK OVERVIEW
HC-020K speed measuring sensor is a wide voltage, high resolution, short response time, and the switch output speed measurement module. It can test motor s rotational speed with black encoder (measured spec. is related to the encoder, the inner diameter of D type encoder that provided is 4mm, can be used for motor output shaft w/4mm diameter, which is TT motor we matched, yellow shell and white axis).
SKU: ND038
Pins & Connectors, Raspberry Pi, Wires & Connectors
HDMI to VGA with Audio Cable High Quality
QUICK OVERVIEW
Plugged into the machine (which is not conducive to the battery power supply)
small volume, built-in audio output (external amplifier and speaker)
maximum resolution support to 1920 x 1080
product audio source output: 3.5 audio socket or 3.5 to R
input: HDMI/Mini HDMI/Micro HD
output: VGA+Audio
SKU: RA318
Bestsellers
Smartphones
-
Motors & Drivers
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
SKU: AA153 -
-
Arduino
Arduino UNO R3 Acrylic Case
QUICK OVERVIEW
- For Arduino UNO R3 Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
SKU: AC011
Laptops & Computers
Laptops & Computers
Smartphones
Sensors
Double speed encoder measuring module
QUICK OVERVIEW
HC-020K speed measuring sensor is a wide voltage, high resolution, short response time, and the switch output speed measurement module. It can test motor s rotational speed with black encoder (measured spec. is related to the encoder, the inner diameter of D type encoder that provided is 4mm, can be used for motor output shaft w/4mm diameter, which is TT motor we matched, yellow shell and white axis).
SKU: ND038
Pins & Connectors, Raspberry Pi, Wires & Connectors
HDMI to VGA with Audio Cable High Quality
QUICK OVERVIEW
Plugged into the machine (which is not conducive to the battery power supply)
small volume, built-in audio output (external amplifier and speaker)
maximum resolution support to 1920 x 1080
product audio source output: 3.5 audio socket or 3.5 to R
input: HDMI/Mini HDMI/Micro HD
output: VGA+Audio
SKU: RA318
Raspberry Pi
Official Raspberry Pi Zero Case
QUICK OVERVIEW
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W.
The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids i.e a Plain Lid, a GPIO Lid and a Camera Lid.
SKU: RA286
Raspberry Pi
Case for Raspberry Pi Model Zero Black
QUICK OVERVIEW
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W.
The case consists of two parts.
It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids i.e a Plain Lid, a GPIO Lid and a Camera Lid.
SKU: RA220
Pins & Connectors, Raspberry Pi, Wires & Connectors
HDMI male to VGA Female Converter, with 3.5 mm Audio Out
Pins & Connectors, Raspberry Pi, Wires & Connectors
HDMI male to VGA Female Converter, with 3.5 mm Audio Out
QUICK OVERVIEW
Interface: HDMI Input, VGA Output.
Converts complete HDMI into VGA video.
Resolution of up to 720P/1080i/1080P
Plug and play, no driver needed.
Powered by HDMI, no external power adapter required.
SKU: RA035
Recently Viewed
Motors & Drivers
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
QUICK OVERVIEW
Latest Arduino CNC Shield Version 3.10
GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
Coolant enable
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
Compact design.
4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
SKU: AA153
Arduino
Arduino UNO R3 Acrylic Case
QUICK OVERVIEW
For Arduino UNO R3 Development Board only.
With screw copper pillar and installation instructions.
To protect your little computer against damages, dust and scratches Clear Top and Bottom.
This case provides easy access to all ports.
It requires no tools for easy assembly and disassembly.
Simply Clicks Together Enclosure.
SKU: AC011
Arduino
Ethernet W5100 Shield Network Expansion Board for Arduino
QUICK OVERVIEW
Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
Stackable Design, can directly be supported by for Arduino official Ethernet Library.
Supports up to four simultaneous socket connections
Can be used to store files for serving over the network.
Can be accessed using the Mini SD TF library.
IEEE802.3af compliant
Low output ripple and noise (100mVpp)
Overload and short-circuit protection
SKU: AA009
Motors & Drivers
L293D Motor Driver/Servo Shield for Arduino
QUICK OVERVIEW
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
Can run motors on 4.5VDC to 25VDC.
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: AA031
Arduino
DS1302 RTC Real Time Clock Module with Battery
QUICK OVERVIEW
The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
SKU: AA122
